An Engineer's Choice

  • Wednesday, 18 May 2016

    Pumps in Series Vs Pumps in Parallel


    Good Day Viewers............!!

    Back after a gap, Recently i got a query asking me for selecting a better way to choose a pumping network, Whether to select Pumps in series or Pumps in parallel for the secondary pumps in chiller plants to pump into production blocks.

    And First of all i'm very happy to share my knowledge with you, and the second thing is its very great experience to receive such mail asking me, but as per regular explanation i'll go on explaining the basics first, and then i'll go deep explaining all those hidden tricks of selection a pump network.

    What is a Pump?

    A Pump is something which uses the mechanical energy produced by a motor to convert into kinetic energy, simply a pump is used to create some pressure in direction opposite to gravitational force in a system.

    How to Select a Pump Capacity?

    For this query Read this post  How to Select a Pump, Motor??
    What are Pumps in parallel?

    Pumps in parallel is the way of connecting all the discharge ends of pump to one End, for this the coupling of the pumps must be perfect, otherwise this wont work efficiently.


    Recommended for you:

    What are Pumps in Series?

    Pumps in series is the way of connecting the Discharge end of first pump is connected to the Suction End of second pump.


    So, Now you got the basics required and i'll explain you deeply what will happen with these arrangements.

    Pumps in Series
    The Above Figure shows you how the pumps in series are arranged, and many of the project engineers will surely get confused over the difference between the pumps in series and pumps in parallel, but while designing a chiller plant if such confusion arises then the result will be unpredictable. As the major part of the chilling plant lies in the pumping of chilled water or brine to production blocks.
    When pumps are connected in series then the Head of those both pumps can be added, that means if you have two pumps P1 and P2 having flowrates as Q1 and Q2, Head as H1 and H2, then the Total possible head from these arrangement can be H = H1 + H2.


    In the above Case study, there were two pumps operating at 200 Cu.m/Hr, having different heads as 100 m and 200 m, then the overall head that would be developed by the pumps arrangement is series would be sum of 100m and 200m, i.e., 300m.

    And the Case would something interesting if the pumps were of different, let suppose if the pumps were having some

    Pumps in Parallel

    Pumps while operating in series would develop other properties irrespective of heads, they will develop some excess flowrate when compared to them individually, Each pump develops the same head H at the corresponding capacity. Thus, the first pump at capacity Q1 develops the same head H as the second pump at capacity Q2. This commonality of head across parallel pumps is the most important feature of pumps installed in parallel. If the pump heads are not matched, pumps in parallel will not function properly.


    From this above figure, it will be clear that if the pumps are arranged in parallel, then the flowrate will be added as resultant, and the points were indicated representing 3 cases.

    Point 1 : Pump 1 operating with 100 Cu.m/Hr,
    Point 2 : Pump 2 operating combinedly at 200 Cu.m/Hr
    Point 3 : Head and Flow for each Pump equals the point 3 

    So, Now you can decide what type of selection you need, still any queries, i'm happy to help you,

    That's it........!!!  Cheer's !!

    Comments are appreciated......!!!



    You May Also Like:



    About The Author


    Hi! I am Ajay Kumar Kalva, Currently serving as the CEO of this site, a tech geek by passion, and a chemical process engineer by profession, i'm interested in writing articles regarding technology, hacking and pharma technology.
    Follow Me on Twitter AjaySpectator & Computer Innovations

    6 comments:

    1. Hai..so WHat u r finally taught for viewers.... If requiring the high head we chose series....and if requires high flowrate we chose parallel.... Am I correct r not

      ReplyDelete
      Replies
      1. @Satish, Exactly, to develop some head we need to go with series network, but in many cases we need to provide some pressure, at that time we need to go with Parallel model, this can be seen with many hot water tubs and chiller plants having parallel networking

        Delete
    2. Please clarify that ..thank you for sharing with every one

      ReplyDelete
      Replies
      1. thanks for reading, Stay tuned for more

        Delete
    3. while arranging pumps in parallel flow will add i.e q1+q2. But in case of series practically it is not possible .eg. 1 st pump connected with 2nd pump in parallel and 1st pump having head of 50 meter (say water than p=5kg/cm2),this 5kg/cm2 pressure will goes into the the suction side of 2nd pump at 5kg/cm2 and can damage the impeller.

      ReplyDelete
      Replies
      1. Just tell me whether u need to connect pump in parallel or series??

        if you connect pump in series then the 2nd pump should have a higher capacity than 1st pump,

        if you connect the pumps in parallel, then the coupling should be good, otherwise there will be lack of flow co-ordination between pumps

        Delete

    OUR TEES

    Support Us by Promoting Us

    ABOUT ADMIN


    Hi! I am Ajay Kumar Kalva, Currently serving as the CEO of this site, a tech geek by passion, and a chemical process engineer by profession, i'm interested in writing articles regarding technology, hacking and pharma technology.

    Followers